Excalibur electronic Home Safety Product H691 User Manual

User’s Guide for  
TM**  
Forever Flashlight  
10-in-1 Lantern  
Model No. H691  
 
SOLAR  
PANEL  
AM/FM  
BAND SWITCH  
Layout of  
Functions of Buttons  
Forever Flashlight  
10-in-1 Lantern  
FLASHLIGHT/LANTERN:  
In a dark place or whenev-  
er you may need light,  
slide the ON/OFF switch to  
the ON position. To turn  
the lantern OFF, slide to  
the OFF position.  
Slide the ON/BLINKER/  
SIREN/OFF switch to SIREN  
position—the SIREN will  
begin to sound. Follow by  
turning the VOLUME switch  
clockwise to activate the  
SIREN function. You can  
adjust the volume by turn-  
ing your VOLUME knob  
clockwise for a louder  
VOLUME and counter-  
clockwise for a softer  
VOLUME.  
O
N/BLINK/SIREN-OFF  
CRANK HANDLE: Turn  
clockwise to generate  
power. For steps in charg-  
ing your unit, see page 8.  
VOLUME (SOUND  
POWER SELECTOR  
SWITCH ON-AUX.  
BAT.-OFF/CHARGE  
TUNING KNOB  
LEVEL CONTROL)  
WITH SIREN  
ON/OFF  
VOLUME/ON/OFF/SIREN:  
Turn clockwise to turn the  
radio on and to increase  
the VOLUME. Turn counter-  
clockwise to decrease the  
VOLUME and to turn the  
radio OFF.  
SPEAKER  
EZ CRANK  
HANDLE  
In an emergency situa-  
tion, slide the switch to  
SIREN BLINKER position—  
and both the BLINKER will  
blink and the emergency  
SIREN will sound. You can  
also turn the VOLUME  
switch clockwise to acti-  
vate the SIREN BLINKER.  
RECHARGEABLE  
BATTERY  
COMPARTMENT  
LOCATED  
UNDERNEATH UNIT  
The Forever Flashlight  
10-in-1 Lantern is also  
equipped with an emer-  
gency apparatus.  
EARPHONE JACK  
DC INPUT JACK  
4
5
 
page 10.  
different types of bulbs to  
use. You will find this  
handy unit can lighten  
your path with the LED  
light or switch over to a  
regular “kryption” bulb.  
TUNING: Turn until you  
find your desired radio  
station.  
6V DC INPUT JACK:  
Connects to an AC/DC  
ADAPTER (not included).  
POWER  
SELECTION  
SWITCH: This is the  
POWER SELECTION mode  
for your three options to  
charge this unit.  
LOUD SPEAKER: This is  
the speaker for the emer-  
gency siren and radio.  
Features  
Our All Forever Flashlight 10-in-1 Lantern combines an LED and  
regular flashlight with a radio, an emergency unit and charging  
capability all into one handy unit.  
BATTERY  
COMPART-  
Use the AUX. BAT.  
switch to run on regular  
batteries. Switch over to  
ON and you can access the  
built-in batteries. See page  
8 for more information on  
charging the Forever  
Flashlight 10-in-1 Lan-  
tern.  
MENT: is located at the bot-  
tom of the unit. See page  
17 for more information.  
This model does not need an external power source. Instead  
it can be recharged by spinning the built-in generator to  
recharge the internal battery for optimum charging.  
Super-bright LED visible for over a mile.  
Additional regular white light option available.  
AM/FM radio.  
Loud siren and bright red blinking light for  
emergency situations.  
Convenient and compact for easy portable carrying.  
Built-in FM telescopic antenna for better reception.  
Solar Panel for charging the unit.  
AC/DC input jack to utilize.  
Flashlight can be pulled out and placed vertically to be used  
as a camping lantern.  
Battery back-up (3 C batteries, not included).  
Headphones jack.  
Low battery indicator.  
RECHARGEABLE BAT-  
TERY AND SPARE BULB  
COMPARTMENT: See page  
10 for more information  
on replacing the recharge-  
able batteries.  
SOLAR PANEL: The  
Forever Flashlight 10-in-1  
Lantern can easily be  
charging by using the  
handy SOLAR PANEL. For  
more information, see  
LIGHT OPTIONS: The  
Forever Flashlight 10-in-1  
Lantern has two light  
options. Underneath the  
flashlight cover are two  
7
6
 
Figure 1: The Forever Flashlight  
10-in-1 Lantern is charged  
by winding the handle  
on the unit.  
How to Use  
3. Pull out the CRANK  
HANDLE, located on the side  
of the unit.  
Charging your  
Forever Flashlight  
10-in-1 Lantern  
4. Hold the unit parallel  
to the ground and wind the  
handle three to five minutes  
(Figure 1). Rotate the han-  
dle at a speed of approxi-  
mately 120 rounds per  
minute. It is recommended  
to charge your Forever  
Flashlight 10-in-1 Lantern  
for three to five minutes  
before first use or after long  
periods of non-use.  
Your Forever Flashlight  
10-in-1 Lantern includes  
three great options to  
charge your unit. For direc-  
tions on these options see  
below:  
lights are on (red and  
green) this indicates that  
you are using the crank han-  
dle at a high enough speed  
to charge. This will indicate  
the voltage is increasing  
steadily.  
and SIREN will work for  
approximately ten minutes.  
If the Forever Flashlight  
10-in-1 Lantern is not going  
to be used for two months  
or more–remove both the  
3 C batteries and the re-  
chargeable battery.  
Charging your unit  
using your built-in  
rechargeable batteries.  
It is charged by winding  
the handle on the unit. For  
best results, follow these  
steps in charging:  
NOTES:  
Your Forever Flashlight  
10-in-1 Lantern will pro-  
vide you with up to thirty  
minutes of radio (volume at  
1/3 the capacity) when  
charged by winding the  
CRANK HANDLE for two to  
three minutes. The BLINKER  
• While winding the han-  
If the unit is completely  
drained of energy, it is rec-  
ommended to use the  
AC/DC adaptor. Plug the  
unit into an electrical outlet  
to fully charge the internal  
dle  
of  
the  
Forever  
Flashlight 10-in-1 Lantern,  
a green indicator light will  
be on. This will signify that  
the charging is in the  
process. If both indicator  
1. Turn the unit off.  
2. Turn your POWER  
SWITCH knob to ON.  
8
9
 
battery. You can also wind  
the unit again three to five  
minutes.  
• While winding the han-  
dle of the Forever Flash-  
light 10-in-1 Lantern, the  
indicator lights will be on.  
This will signify that the  
charging is in the process.  
any 6V/200mA AC/DC  
adapter for charging the  
unit. Simply turn off your  
lantern and use your DC  
INPUT JACK located at the  
back of your unit and plug  
into an electrical outlet.  
Your built-in batteries will  
be fully charged within  
three hours. Make certain  
voltage is compatible. Do  
not charge the unit for more  
than 24 hours, this may  
damage the unit.  
indicator light. This will  
signify that the charging is  
in the process.  
Keep in mind if your  
radio has not been in use for  
a long length of time, this  
will cause the battery life to  
be shorter than normal even  
after recharging. In this  
case, recharge the battery  
for three to five minutes.  
Then discharge completely.  
Repeat this process several  
times to regain full per-  
formance of the battery.  
This is not necessary, but it  
is helpful in completing a  
full charge.  
4. Place your Forever  
Flashlight 10-in-1 Lantern  
in full, direct sunlight. You  
must make sure that the  
SOLAR PANEL is located at  
the top of your unit is in full  
sun. Your built-in batteries  
will then charge. Five to six  
hours of full sunlight will  
allow the unit to charge at  
How to replace the  
Rechargeable Battery.  
Simply turn off your unit  
and and open your FLASH-  
LIGHT COVER. Then simply  
reach into the unit and  
unplug the rechargeable  
battery. Replace with a new  
battery. Close the FLASH-  
LIGHT COVER and the bat-  
tery replacement process is  
complete.  
approximately  
charge.  
a
60%  
Charging your unit  
using your Solar Panel.  
To charge the unit to full  
capacity, see the section on  
charging your unit by using  
an AC/DC ADAPTOR on page  
10.  
1. Turn the unit off.  
2. Turn your POWER  
SELECTION SWITCH knob to  
ON.  
• If you turn the CRANK  
HANDLE slowly, the batter-  
ies can not be charged prop-  
erly. The recommended turn  
speed would be 120 rounds  
per minute.  
Charging your unit  
using an AC/DC  
adaptor.  
3. When the SOLAR  
option is bring used, the  
Forever Flashlight 10-in-1  
Lantern will display a green  
The Forever Flashlight  
10-in-1 Lantern is a DC  
charge design. You can use  
10  
11  
 
Using your unit  
with regular batteries.  
batteries as the main power  
source, slide POWER switch  
to the AUX.BAT position.  
To turn off the flashlight,  
switch the light switch to  
OFF.  
ON, this is important unless  
you want to access your  
BACK-UP BATTERIES. Then  
select BLINK/SIREN at your  
POWER switch. This will  
turn the BLINKER function  
on.  
1. Turn the unit off.  
How to replace the  
Flashlight Bulb.  
2. Use your BATTERY  
COMPARTMENT DOOR locat-  
ed at the bottom of your  
unit. Open the compartment  
door with a coin or a screw-  
driver.  
Using the Flashlight  
Your Forever Flashlight  
10-in-1 Lantern includes an  
ultra bright LED bulb and a  
traditional white bulb. The  
LED energy saving light  
uses minimal power con-  
sumption when turned on.  
You then can switch to the  
second option and use the  
traditional light bulb.  
Simply turn off your unit  
and and open your FLASH-  
LIGHT COVER. Press the  
rubber cover to release the  
inner flashlight cover to  
retrieve the spare light bulb.  
Then simply reach into the  
unit and replace the bulb.  
Remember to when your  
bulbs burn out to match  
with similar voltage bulb.  
To use the BLINKER and  
SIREN simultaneously, first,  
select the BLINK/SIREN at  
your power switch and then  
turn on the VOLUME knob.  
This will turn the BLINKER  
function on. Then turn on  
the VOLUME knob.  
3. Insert three C batter-  
ies, not included. Be sure to  
insert the battery with the  
correct polarities (+ and -).  
For more information on  
the batteries, see pages 3  
and 17.  
Slide the POWER SELEC-  
TION switch to ON. This is  
important unless you want  
to access your BACK-UP  
BATTERIES. Then switch  
your ON/BLINK/SIREN/OFF  
to the ON position. This will  
turn the LIGHT function on.  
Close the  
FLASHLIGHT  
Using the Radio  
4. Replace the batteries  
when the sound becomes  
distorted or the flashlight  
becomes dim.  
COVER and the light bulb  
replacement process is  
complete.  
Your Forever Flashlight  
10-in-1 Lantern can tune  
the AM/FM radio stations.  
To use the radio, first, slide  
the POWER switch to ON,  
this is important unless you  
want to access your BACK-  
UP BATTERIES.  
Using the Blinker  
and Siren  
5. To utilize the back-up  
Excalibur Electronics reserves the right to make technical changes without  
notice in the interest of progress.  
To use the BLINKER, first,  
slide the POWER switch to  
12  
13  
 
until you find your desired  
radio station.  
Power Source:  
To listen to the  
radio:  
Recharge battery type:  
2/3 AA size in one  
battery pad: 3.6V/300  
mAh Ni-Cad batteries  
or a 600 mAh NI-MH  
Back-up batteries:  
three C batteries,  
not included.  
Adjust the volume by  
turning the VOLUME knob.  
Turn the VOLUME control  
knob clockwise to turn the  
unit on.  
For better reception:  
Slide the BAND switch to  
AM or FM.  
FM/AM: Turn and rotate  
your unit to locate best  
reception. Fully extend the  
FM antenna.  
Figure 3: Pull out the lens to  
form a lantern and slide the  
power selection switch on.  
Turn the TUNING knob  
Hand-winding speed:  
120 rpm or faster  
AC/DC 6V 200mA  
adapter,  
access your BACK-UP BAT-  
TERIES. Then switch your  
ON/BLINK/SIREN/OFF to the  
ON position. This will turn  
the LIGHT function on.  
To turn off  
the radio:  
Turn the VOLUME control  
knob counter-clockwise to  
turn unit off.  
not included.  
Solar power  
EZ crank handle  
Spare light Bulb:  
PMMU-0023-0104  
To turn off the flashlight,  
switch the light switch to  
OFF.  
Using the Lantern  
Specifications  
Set your Lantern/Flash-  
light on its end (Figure 2).  
Pull out the lens to form a  
lantern and slide the POWER  
SELECTION switch to ON  
(Figure 3). This is impor-  
tant unless you want to  
Band Coverage:  
Outer dimension:  
9.5'' x 4.5'' x 3.5''  
Weight: 1.7 lbs  
Maximum power  
consumption: 0.6W  
Voltage: 3.6V-4.0V  
AM 530 - 1710 KHz  
FM 88 - 108 MHz  
Figure 2: Set your Forever  
Flashlight 10-in-1 Lantern  
on its end.  
14  
15  
 
Caution  
Special Care & Handling  
Always turn off the flashlight when charging.  
Forever Flashlight 10-in-1 Lantern generates a  
strong magnetic field that surrounds it. Keep the  
unit at least one foot away from medical devices,  
computers, magnetic storage media, or other  
devices such as:  
Do not charge for more than 24 hours straight. This  
could damage the unit’s recharging system.  
Avoid rough handling such as bumping or dropping.  
Avoid extreme temperatures. For best results, use  
between the temperatures of 39º F and 100º F  
(4º C and 38º C).  
• Pacemakers  
• Cassette tapes  
• Credit cards  
• Televisions  
Clean only using a slightly damp cloth. Do not use  
cleaners with chemical agents.  
• Computer discs • Video tapes tube (CRT)  
• Any device with a cathode ray  
Clean the lens with glass-cleaning products.  
Do not use petroleum distillates (such as gasoline or  
kerosene) or solvents such as acetone to clean  
any part of the Forever Flashlight 10-in-1 Lantern.  
Do NOT attempt to point the light into the human  
eye directly. This strong light may cause physical  
damage to an eye.  
Take out the back-up batteries and remove the  
rechargeable batteries by disconnecting the battery  
plug, Only if the unit will not be accessed for  
a long time.  
** This product uses rechargeable batteries for energy  
storage that may need to be replaced after  
extended use.  
16  
17  
 
Battery Information  
Batteries should be installed and replaced only by an adult.  
Forever Flashlight 10-in-1 Lantern uses three C batteries,  
not included.  
YOU CAN ALSO ORDER AN AC ADAPTER  
(THE ADAPTER MODEL NUMBER IS: 1A-10014)  
ONLY FOR $12.95 WITH $2.50 SHIPPING  
& HANDLING. GO TO  
Do not mix alkaline, standard (carbon-zinc)  
or rechargeable (nickel-cadmium) batteries.  
Do not mix old and new batteries.  
Do not use rechargeable batteries.  
Remove exhausted batteries from the unit.  
Do not short circuit battery terminals.  
WWW.EXCALIBURELECTRONICS.COM  
OR CALL 305.477.8080 FOR MORE  
INFORMATION.  
Remove batteries and store them in a cool,  
dry place when not in use.  
To avoid explosion or leakage, do not dispose  
of batteries in a fire or attempt to recharge  
alkaline or other non-rechargeable batteries.  
Install batteries so that the polarity (+ and -) matches the  
diagrams in the battery compartment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired operation.  
Use only batteries of the same type and equivalency.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable l  
interference in a residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more  
of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
18  
19  
 
not allow exclusion of inci-  
dental or consequential dam-  
ages, so the above limitations  
and exclusions in these  
instances may not apply. The  
only authorized service cen-  
ter in the United States is:  
the complaint and including  
your daytime telephone num-  
ber, inside the shipping car-  
ton. If your warranty has  
expired and you want an esti-  
mated fee for service, write to  
the above address, specifying  
the model and the problem.  
LIMITED 90-DAY WARRANTY  
EXCALIBUR ELECTRON-  
ICS, INC., warrants to the  
original consumer that its  
products are free from any  
electrical or mechanical  
defects for a period of 90  
DAYS from the date of pur-  
chase. If any such defect is  
discovered within the war-  
ranty period, EXCALIBUR  
ELECTRONICS, INC., will  
repair or replace the unit free  
of charge upon receipt of the  
unit, shipped postage prepaid  
and insured to the factory  
address shown at right.  
wear and tear, inadequate  
maintenance, commercial  
use, or unreasonable use of  
the unit. Removal of the top  
panel voids all warranties.  
This warranty does not cover  
cost of repairs made or  
attempted outside of the fac-  
tory.  
Excalibur Electronics, Inc.  
13755 SW 119th Ave  
Miami, Florida 33186  
U.S.A.  
PLEASE DO NOT SEND  
YOUR UNIT WITHOUT  
RECEIVING  
Phone: 305.477.8080  
Fax: 305.477.9516  
AN ESTIMATE  
FOR SERVICING.  
WE CANNOT  
Any applicable implied war-  
ranties, including warranties  
of merchantability and fit-  
ness, are hereby limited to 90  
DAYS from the date of pur-  
chase. Consequential or inci-  
dental damages resulting  
from a breach of any applica-  
ble express or implied war-  
ranties are hereby excluded.  
Some states do not allow lim-  
itations on the duration of  
implied warranties and do  
STORE YOUR UNIT!  
Ship the unit carefully  
packed, preferably  
in the original  
carton, and send it  
prepaid, and  
adequately  
insured.  
Include a  
letter,  
detailing  
The warranty covers normal  
consumer use and does not  
cover damage that occurs in  
shipment or failure that  
results from alterations, acci-  
dent, misuse, abuse, neglect,  
21  
20  
 
Notes  
Notes  
22  
23  
 
EXCALIBUR ELECTRONICS, INC.  
13755 SW 119TH AVENUE,  
MIAMI, FLORIDA 33186 U.S.A.  
Phone: 305.477.8080  
Fax: 305.477.9516  
Play games live at:  
H691 (MA) FFlash 10in1lantern 071506 V9  
 

Elation Professional Work Light 108IP User Manual
Euphonix Camcorder Accessories MC Control User Manual
Everpure Water System EV9272 19 User Manual
Extron electronic Universal Remote IR 801 User Manual
FujiFilm Digital Camera 16421452 User Manual
Garland Fryer 36E User Manual
Garland Oven UIR36 User Manual
GE Monogram Ventilation Hood ZV30 ZV36 ZV48 User Manual
GE Monogram Washer ZBD6605 User Manual
GE Refrigerator 162D9639P004 User Manual