Extron electronic Stereo Receiver DVS 100 User Manual

Specifications — DVS 100/150 Digital Video Scalers

Video input

Number/signal type ................... Both models............................. 1 component video (Y, R-Y, B-Y), 1 S-video,

1 composite video

DVS 150 only ........................... 1 RGBHV, RGBS, RGsB pass-through

Connectors.................................... 3 BNC female .......................... component video

1 4-pin mini-DIN female ...... S-video

1 BNC female .......................... composite video

1 15-pin HD female ............... RGB pass-through (DVS 150 only)

Nominal level(s) .......................... Analog — 0.7V to 1.0V p-p

Impedance .................................... 75 ohms

Vertical frequency ....................... 50 Hz to 60 Hz (does not apply to DVS 150 pass-through)

Video output

Number/type/format ................ 1 scaled RGBHV, RGBS, RGsB

1 scaled RGBHV or pass-through RGBHV/RGBS/RGsB

Connectors.................................... 6 BNC female

1 15-pin HD female

Nominal level............................... 0.7V p-p

Impedance .................................... 75 ohms

Vertical frequency ....................... 56 Hz, 60 Hz or 75 Hz

Scaled VGA resolution ............... 640x480, 800x600, 832x624, 848x480, 852x480, 1024x768, 1280x768, 1280x1024,

1360x765, HDTV 480p, 720p and 1080p

Sync

Input type ..................................... DVS 150 only ........................... RGBHV, RGBS, RGsB

Output type .................................. RGBHV, RGBS, RGsB

Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM

Output level ................................. TTL — 5.0V p-p

Output impedance ...................... 75 ohms

Polarity .......................................... Positive or negative (switch-selectable)

Control/Remote — decoder/scaler

Serial control port........................ RS-232, 9-pin female D connector

Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity

Pin configurations ....................... 1 = input 1 select

2 = TX

3 = RX

4 = input 2 select

5 = GND

6 = input 3 select

7 = input 4 select (DVS 150 only)

Contact closure ............................ 9-pin female D connector

Program control........................... Extron’s control program for Windows®

Extron’s Simple Instruction Set™ – SIS™

1-2

DVS 100, DVS 150 Specifications