Fujitsu Printer FTP 627MCL053 User Manual

24v driven, FTP-607 Series  
2” HiGH SPeed THerMaL PrinTer  
FTP-627MCL053/054  
n Overview  
The FTP-627 MCL Series are 24V driven high-speed printers  
with a 2-inch paper width equivalent.  
The FTP-627 MCL Series can be used for a variety of  
applications, such as CAT/EFT, POS, banking terminals, and  
measurement and medical equipment.  
n HiGHLiGHTS  
• Ultra compact  
Height ꢀ5.5 mm, width 83.5 mm, depth 35.7 mm  
FTP-627MCL053/054  
• High speed printing  
It can print at ꢀ00 mm/s (800 dotlines/s) maximum by using  
Fujitsu's unique head drive control.  
• Two types of paper routes  
Front or bottom feed.  
• easy paper setting  
Our unique platen release mechanism allows a  
wide paper route even if the printer is ultra-compact, so  
paper can be easily inserted. Conventional auto loading is  
also available.  
FTP-627DSL238  
 
FTP-627MCL053/054  
n SPeCiFiCaTiOnS  
Specification  
Item  
FTP-628MCL053  
FTP-628MCL054  
Interface  
Conforms to RS232C / Centronics  
24 VDC average current, 1.5A (2.2A peak)  
(print ratio: 25%, print speed: 100mm/sec. )  
For print head  
Power  
For motor  
24 VDC 5%, 1A maximum  
5 VDC 5%, 0.1 A maximum  
supply  
For logic  
Mechanism  
Interface board  
Mechanism  
Interface board  
83.5 x 35.7 x 15.5 mm  
70 x 60 x 24mm  
72.3 x 34.3 x 15.5 mm  
Dimensions  
(WxDxH)  
Approximately 49g  
Approximately 25g  
Approximately 47g  
Weight  
Life  
Pulse resistance: 50 million pulses/dot (under our standard  
conditions); Abrasion resistance: paper traveling distance 50km  
(print ratio: 25% or less)  
Head  
Operating temperature*  
Operating humidity  
Storage temperature  
Storage humidity  
0˚ C to 50˚ C  
20 to 85% RH (no condensation)  
-20˚ C to +60˚ C (paper not included)  
5 to 95% RH (no condensation)  
Operating  
environment  
Head temperature  
detection  
Detected by thermistor  
Detection  
function  
Paper out/mark detection Detected by photo-interrupter  
Platen release  
Detected by sliding switch  
High Sensitive Paper  
Standard paper:  
TF50KS-E4 (Nippon Paper)  
TF60KS-E(Nippon Paper),  
FTP-020PU001 (58mm), PD105R  
(Oji Paper), FTP-020P0701 (58mm)  
Medium Life Paper  
Long Life Paper  
TF60KS-F1, FTP-020P0102  
(58mm), PD170R (Oji Paper),  
P220VBB-1 Mitsubishi Paper)  
Recommended thermal sensitive paper  
PD160R-N (Oji Paper),  
AFB-235 (Mitsubishi Paper),  
TP50KJ-R (Nippon Paper),  
HA220AA (Nippon Paper)  
*+5˚C to +40˚C printing density assurance rance.  
3
 
FTP-627MCL053/054  
n FUnCTiOn OF inTerFaCe bOard  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test print function  
8.  
9.  
Motor power saving function  
Mark detection function  
Paper out detection  
Paper near end detection  
Platen open detection  
10. MCU operation abnormality detection  
11. Power ON/OFF sequence protection  
12. Motor over-current protection  
13. Hardware timer  
Thermal head temperature abnormality detection  
Blow-out fuse detection  
Head voltage abnormality detection  
n diMenSiOnS  
1. Printer mechanism  
FTP-627MCL053  
FTP-627MCL054  
Unit: mm  
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).  
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is  
open.  
4
 
FTP-627MCL053/054  
2. interface board  
41.0  
30  
1
CN3  
CN8  
CN5  
CN1  
CN2  
CN7  
CN6  
1
6
3
1
8
1
17.5  
35.5  
51.0  
3.3  
63.5  
3.3  
70.0  
Unit: mm  
5
 
FTP-627MCL053/054  
1. Connector (FPC) specification (CN3)  
(ꢀ) Connector  
Mechanical unit side:  
Remote side (housing site):  
FPC connector  
526ꢀ0-3090 (made by Molex)  
(2) Pin assignment on the mechanical side  
Signal  
PHK  
I/O Contents  
No  
1
O
O
I
Photointerrupter (Cathode)  
2
VSEN  
PHE  
SW  
SW  
VH  
Ground power supply for paper sensor  
Photointerrupter (Emittor)  
Platen open switch  
3
4
5
Platen open switch  
6
7
VH  
Power supply for thermal head  
8
VH  
9
DI  
Print data in  
Strobe 3  
10 STB3  
11 VDD  
12 TH  
I
O
I
Power for logic  
Thermistor  
13 GND  
14 GND  
15 GND  
16 GND  
17 GND  
18 GND  
19 STB1  
20 STB2  
21 LAT  
22 CLK  
23 NC  
Ground power supply for thermal head  
Strobe 1  
I
Strobe 2  
I
Print data latch  
Clock  
I
I
Not connected  
24 VH  
25 VH  
Power supply for thermal head  
Stepping motor excitation signal  
26 VH  
27 MT/A  
28 MT/A  
29 MT/B  
30 MT/B  
I
I
I
6
 
FTP-627MCL053/054  
Sensor (Photo-  
interruptor)  
Platen unit  
Thermal head  
Motor  
FPC  
Connect terminal:  
surface side  
Connector No  
30,29, .....................2,ꢀ  
(FPC pin numbers)  
Fujitsu Components International Headquarter Offices  
Japan  
europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo ꢀ4ꢀ, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2ꢀ32 WV Hoofddorp  
Netherlands  
Tel: (8ꢀ-3) 5449-70ꢀ0  
Tel: (3ꢀ-23) 55609ꢀ0  
Fax: (8ꢀ-3) 5449-2626  
Fax: (3ꢀ-23) 5560950  
north and South america  
Asia Pacific  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (ꢀ-408) 745-4900  
Fujitsu Components Asia Ltd.  
ꢀ02E Pasir Panjang Road  
#04-0ꢀ Citilink Warehouse Complex  
Singapore ꢀꢀ8529  
Fax: (ꢀ-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-302ꢀ  
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective  
owners.  
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu  
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 01/26/2006.  
7
 

Electro Voice Speaker System FRi 152 85 User Manual
Euro Pro Iron G6118H User Manual
Fisher Price Lawn Mower X6020 User Manual
Fostex Car Speaker T900A User Manual
Gateway Marine Radio 312785C User Manual
Gemini Musical Instrument PMX 1100 User Manual
Gemini Musical Instrument UMX 7 User Manual
GE Monogram Cooktop ZGU36K User Manual
GE Refrigerator 162D3907P004 User Manual
GE Refrigerator 162D7740P005 User Manual