Gianni Industries Door DG 80 User Manual

DG-80  
Stand Alone Digital Keypad  
Features  
Blue back light keypad, easy to recognize in the dark.  
ANSI standard size, convenience for mortise installation  
Allows up to 99 PIN codes  
Epoxy potting, water-proof design  
Dual relays operate simultaneously, able to control  
locks and other access control system  
Cutting spare delay time after door closes for  
anti-tailgating  
Specifications  
Operating Voltage: 12~24 Vdc  
Current Draw: Average 35mA, Peak 130mA @ 12Vdc  
Input: request-to-exit, time out reed switch contact  
Output: Dual relays, N.O. / N.C./ Com. Output (free voltage  
contact)  
Relays Electric Current: 2A@30Vdc, 0.4A @ 120Vac  
Dual relays operate simultaneously:  
Strike Time: 1~99 seconds  
LED display with audible indication  
EPROM: Non-volatile memory, System will retain all  
programs and codes after breaks down power  
Metal die casting housing with special screws  
Strike mode: Access Timer or Latch  
Memory Volume: 99 slots  
Operating Temperature: -20~+70C  
Ambient Humidity: 5~95% relative humidity non-  
condensing  
Factory Master Code: 12345  
Statement  
The DG-80 is a dual relay digital code-operated for access  
control keypad with up to 99 individual user PINs, user access  
PINs ensure that all functions controlled to authorized  
persons only. The door reed switch Input is used to time out  
the timer when door is moved for anti-tailgating. It's designed  
to mount on ANSI standard-single-gang electric wall box or on  
the surface of an interior or exterior wall.  
Invalid PIN Lock-out: The system will shut down for 60  
seconds while 30 codes of incorrectly Master Codes  
enrolled or PIN codes attempted)None beeper signal  
of keypad activations(.  
EPROM: Non-volatile memory, System will retain all  
programs and codes after a total loss of power.  
Logical memory can prevents unauthorized persons  
from gaining PIN code entry by trial and error, The system will  
shut down for 60 seconds while 30 codes of incorrectly Master  
Codes enrolled or PIN codes attempted )None beeper signal  
of keypad activations(. Metal die casting housing with vandal  
resistant screws to seize every security measures of the unit.  
Warranty  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
1
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-DG-80 Ver. D Published on 2008.05.06  
 

Eizo Computer Monitor FlexScan L885 User Manual
Elation Professional Marine Lighting ART1024 User Manual
Electro Voice Microphone N D868 User Manual
Field Controls Air Cleaner CC 2000 User Manual
Frigidaire Freezer GLFH17F8H User Manual
Gardena Irrigation System 1559 User Manual
Garmin Marine GPS System 190 01120 00 User Manual
Gefen Switch 4x1 DVI Switcher User Manual
GE Intercom System 25413 User Manual
Global Machinery Company Sander OS300 User Manual