Gianni Industries Door GL 1200S User Manual

GL-1200S Standard Surface  
Water-Proof Electromagnetic Lock  
Regular Installation  
Magnet  
Armature  
(On Power)  
Fire Exposure and Hose Stream Tests were conducted in  
accordance with the standard, "Positive Pressure Fire Tests of  
Door Assemblies," ANSI / UL 10B and 10C, uniform building  
code standard UBC 7-2 (1997).  
Unique Anti-Residual design  
When the power is switched off, the holding force will be  
discontinuity and the bolt was installed in armature will pop  
Statement  
The fail-safe Electromagnetic Lock design with no  
mechanical parts but magnetic force to secure and release the  
doors, suitable for use in areas which required access  
controlled or egress such as exit door.  
The Electromagnetic Locks are totally sealed in an epoxy  
filled stainless steel case for water-resistant and vandal-  
resistant purpose. A threaded conduit fitting ensures weather  
resistant protection of the wiring therefore it is ideal for indoor  
and outdoor applications, even in severe weather.  
We offers up to 1200 pounds holding force with 12V DC  
power input (24V DC or 12/24V DC dual input voltage  
available by special order), and it can be applied with access  
control, and with the full range of optional brackets, it can be  
installed on all type of door frames such as Hollow and  
Wooden door. It is the best choice for electronic security  
industry and system integrators.  
This series of Waterproof Magnetic Lock is made with epoxy  
potting compound and is protected by this compound. Also,  
GEM Waterproof Series Magnetic Locks have been proved to  
Specifications  
have withstood  
a
water resistance as established in  
Voltage Tolerance: 15%  
accordance with the test procedures of IPX7, IPX8 through a  
trusted third party. Therefore users need not worry that the  
lock will be rusted or sparked, if the lock is using in outdoor  
applications and installing in confined space where any  
inflammable gas.  
Current Draw: 460mA@12Vdc (at temperature 20 C)  
(Further notice for diverse input voltage on special order requirement)  
Operating Temperature: -10~55C (14~131F(  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
)current temperature +20C (  
Holding Force: 1200 lbs )545 Kg(  
Dimensions:  
Magnet:(L) 220, (W) 68, (D) 41 mm  
Armature Plate:(L) 185, (W) 62, (D) 16 mm  
Special Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight )Approx.(: 5.0 Kg  
Warranty  
Magnetic bond sensor monitor output (GL-1200S-R)  
(SPDT rated 0.25A@12V DC), remotely monitors the door  
lock or unlock status. (N.C. Output--Door opened; N.O.  
Output--Door closed)  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
5
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-GL-1200S Ver. C Published on 2008.05.12  
 

Ei Electronics Smoke Alarm EI161R User Manual
Extron electronic Switch TPX 88 User Manual
Fisher Price Motorized Toy Car 76922 User Manual
Furuno Stepper Machine LS 6000 User Manual
Gateway Laptop 400SD4 User Manual
GE Monogram Ventilation Hood ZV900 User Manual
GE Refrigerator 200D2600P015 User Manual
GE Washer WWA9800M User Manual
Gitzo Camcorder Accessories GT3540XLS User Manual
Globe Mixer SP8 User Manual