Furuno Marine RADAR IF 1500AIS User Manual

AIS INTERFACE  
IF-1500AIS  
 
SAFETY INSTRUCTIONS  
Safety Instructions for the Installer  
Safety Instructions for the Operator  
WARNING  
WARNING  
Turn off the power at the switchboard  
before beginning the installation.  
Do not disassemble or modify the  
equipment.  
Fire, electrical shock or serious injury can  
result.  
Fire or electrical shock can result if the  
power is left on.  
Immediately turn off the power at the  
switchboard if the equipment is emitting  
smoke or fire.  
Do not install the equipment where it  
may get wet from rain or water splash.  
Water in the equipment can result in fire,  
electrical shock or damage the equipment.  
Continued use of the equipment can cause  
fire or electrical shock. Contact a FURUNO  
agent for service.  
Be sure that the power supply is  
compatible with the voltage rating of  
the equipment.  
Make sure no rain or water splash leaks  
into the equipment.  
Connection of an incorrect power supply  
can cause fire or damage the equipment.  
Fire or electrical shock can result if water  
leaks in the equipment.  
Keep heater away from equipment.  
CAUTION  
A heater may melt the power cord, which  
can result in fire or electrical shock.  
Observe the following compass safe  
distances to prevent interference to a  
magnetic compass:  
Do not place liquid-filled containers on  
the top of the equipment.  
Standard Steering  
compass compass  
Fire or electrical shock can result.  
0.55 m  
0.35 m  
1
 
Foreword  
FURUNO Electric Company thanks you for purchasing the IF-1500AIS AIS Interface. We  
are confident you will discover why the FURUNO name has become synonymous with  
quality and reliability.  
Your equipment is designed and constructed to meet the rigorous demands of the marine  
environment. However, no machine can perform its intended function unless properly  
installed and maintained. Please carefully read and follow the installation and maintenance  
procedures set forth in this manual.  
Thank you for considering and purchasing FURUNO.  
Features  
The IF-1500AIS enables connection of the FURUNO AIS Transponder FA-100 to the  
NavNet2 Series radars to display AIS information on the radar and plotter displays. AIS  
target data input from the transponder are selected and sorted (by range, CPA/TCPA ,etc.),  
format-converted and then output to the NavNet2 series radar.  
Equipment List  
Name  
Type  
Code No.  
Qty  
Remarks  
Standard supply  
AIS Interface  
IF-1500AIS  
CP14-06500  
1
Installation  
Materials  
000-040-013  
1 set  
1) Cable assy.  
MJ-A15A3F0013-035-3A  
MJ-A7SPF0003-050  
MJ-A6SPF0012-050  
2) Self-tapping screws 4x16,  
4 pcs.  
Spare Parts  
Optional supply  
Cable Assy.  
Cable Assy.  
Cable Assy.  
Cable Assy.  
SP14-03301  
004-000-730  
1 set  
MJ-A15A3F0013-035-3A 000-145-880  
1
1
1
1
MJ-A7SPF0003-050  
MJ-A6SPF0012-050  
MJ-A6SPF0012-100  
000-136-730  
000-134-424  
000-133-817  
2
 
System Configuration  
Cable  
Cable  
MJ-A6SPF0012-050 (5 m)*  
MJ-A7SPF0003-050 (5 m)  
AIS Transponder  
FA-100  
NavNet2 Series  
Radar, Plotter  
IF-1500AIS  
* 10 m cable optionally  
available  
Cable  
MJ-A15A3F0013-035  
12-24 VDC  
Mounting  
The unit can be mounted on a desktop or a bulkhead. When choosing a mounting location,  
keep in mind the following points:  
Consider cable lengths.  
Choose a location away from rain and water splash and one which is not in direct  
sunlight.  
Observe the maintenance space noted in the outline drawing to facilitate servicing.  
Observe the compass safe distances noted in the safety instructions at the beginning of  
this manual.  
Fix the unit to the mounting location with four self-tapping screws (4x16). Connect cables  
referring to the interconnection diagram. Run a ground wire (local supply) between the  
ground terminal and ship’s superstructure.  
3
 
Wiring  
Refer to the interconnection diagram at the back of this manual and the illustration below.  
For IEC 61162-2  
AIS  
IF-1500AIS  
-
-
-
External display  
Aux. display  
Pilot plug  
J1:AIS IN  
WHT  
BLK  
YEL  
RD A  
1
2
3
4
5
6
7
TD A  
RD B  
TD B  
TD A  
RD H  
GRN  
TD B  
RD C  
RED  
BLU  
ISO GND  
ISO GND  
F.G.  
SIG. GND  
SIG. GND  
F.G.  
MJ-A7SPF0003-050  
Notice:  
Do not connect "SIG. GND" of the IF-1500AIS  
to "Frame Ground".  
For IEC 61162-1, NMEA-0183  
AIS  
IF-1500AIS  
J1:AIS IN  
-
-
-
External display  
Aux. display  
Pilot plug  
WHT  
BLK  
YEL  
RD H  
1
2
3
4
5
6
7
TD A  
RD C  
TD A  
TD B  
N.C  
TD B  
RD H  
GRN  
RD C  
RED  
BLU  
SIG. GND  
SIG. GND  
F.G.  
N.C  
MJ-A7SPF0003-050  
F.G.  
Notice:  
Do not connect "SIG. GND" of the IF-1500AIS  
to "Frame Ground".  
4
 
Data Sentences  
The following data sentences are input to and output from the AIS Interface.  
AIS  
Transponder  
ABM  
BBM  
ACK  
VDM  
VDO  
ALR  
LRI/LRF  
ABK  
TXT  
ACA  
LRI/LRF  
AIS  
Interface  
ACK  
TGT Qty  
VDM  
VDO  
Sort Condition  
ALR  
TXT  
P Sentences  
NavNet2 Series  
Radar, Plotter  
Operation  
No operation is required of the user. All AIS-related operations are carried out from the  
NavNet2 series radar or plotter.  
Cleaning  
Dust may be removed from the cabinet with a soft dry cloth. For stubborn dirt, water-diluted  
mild detergent may be used. Do not use chemical-based cleaning agents to clean the  
cabinet; they can remove paint and markings.  
Replacement of Fuse  
The 3A fuse in the power cable protects the  
equipment from reverse polarity and equipment  
trouble. If the fuse blows, find the cause before  
WARNING  
Use the proper fuse.  
replacing the fuse. If it blows after replacement  
request service.  
Use of a wrong fuse can result in damage  
to the equipment or cause fire.  
5
 
FURUNO  
IF-1500AIS  
SPECIFICATIONS OF  
AIS INTERFACE  
IF-1500AIS  
1. PORTS  
1.1 Number of ports  
2 ports (IN/OUT)  
38,400 bps  
1.2 Baud rate  
1.3 AIS IN port (RS-485)  
Input data: VDM, VDO, ALR, ABK, TXT, ACA, LRI/LRF  
Output data: ABM, BBM, ACK, LRI/LRF  
1.4 DATA OUT port  
1.5 Digital interface  
Input data: ACK, Target quantity, Sort condition  
Output data: VDM, VDO, ALR, TXT, P-sentences  
IEC 61162-2  
2. ENVIRONMENTAL CONDITIONS  
2.1 Useable temperature  
2.2 Relative humidity  
2.3 EMC  
-15°C to 55°C  
95%(40°C)  
IEC 60945  
IP20  
2.4 Waterproofing  
3. POWER SUPPLY  
4. COLOR  
12-24 VDC, 0.2-0.1 A  
N3.0  
SP - 1  
E4435S01B  
 
A -1  
1/1  
14CS-X-9851 -3  
PACKING LIST  
IF-1500AIS  
N A M E  
DESCRIPTION/CODE №  
O U T L I N E  
Q'TY  
1
ユニット  
UNIT  
IF-1500AIS  
AISインターフェイス  
AIS INTERFACE  
000-152-849  
予備品  
ヒューズ  
SPARE PARTS  
SP14-03301  
FGBO-A 3A AC125V  
000-549-063  
2
FUSE  
工事材料  
INSTALLATION MATERIALS  
CP14-06500  
MJ-A15A3F0013-035-3A  
ケーブル組品MJ  
1
1
1
4
POWER CABLE  
000-145-880  
MJ-A7SPF0003-050  
ケーブル組品MJ  
CABLE ASSY.  
000-136-730  
MJ-A6SPF0012-050  
ケーブル組品MJ  
SIGNAL CABLE ASSEMBLY  
000-134-424  
4X16 SUS304 1シュ  
+トラスタッピンネジ  
SELF-TAPPING SCREW  
000-802-080  
OMC-44350-*  
000-152-852  
図書  
DOCUMENT  
取扱説明書  
1
OPERATOR'S MANUAL  
(略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.)  
14CS-X-9851  
 
Y. Hatai  
 
 
 
この図書には環境配慮型漂白  
方式の用紙を使用しています。  
・機器の修理・使用方法等に関するお問い合わせは、お買い上げの販売店・代理店、あるいは  
最寄りの当社各支店・営業所へお願いします。  
・お問い合わせは  
発行  
〒662-8580  
兵庫県西宮市芦原町9番52号  
本書の無断複写複製(コピー)は特定の  
場合を除き、当社の権利侵害になります。  
2005年 4月  
初版発行  
Printed in Japan  
2005年 5月 23日 A2発行  
PUB.No.OMC-44350-A2  
(DAMI ) IF-1500AIS  
*00015285200*  
*00015285200*  
* 0 0 0 1 5 2 8 5 2 0 0 *  
*OMC44350A20*  
*OMC44350A20*  
* O M C 4 4 3 5 0 A 2 0 *  
 

Exmark Lawn Mower 4500 872 User Manual
Exmark Lawn Mower TT20KCE User Manual
Faber Blower Remote Blower User Manual
Flymo Trimmer HT42 420 User Manual
FoodSaver Food Saver v825 User Manual
Fostex Recording Equipment A 2 User Manual
Frigidaire Food Warmer 318201822 User Manual
Gateway Network Router DPC3925 User Manual
GE Coffeemaker 169185 User Manual
GE Ice Maker ZDI15 User Manual